INDUSTRIAL SERVICES
Industrial Services Group
The value of the services offered by Gly-Tech’s Industrial Services Group is founded in the technical and practical knowledge,
experience of the management team and the field technicians.
Gly-Tech approaches each project in three fundamental steps, (a) task assessment and investigation, (b) solution and contingency definition, (c) process implementation. The thoroughness of each of these steps is critical to the safe and cost effective project completion.
Below is an overview of the services provided and the markets served by Gly-Tech.
Service Lines
- Lube / Hydraulic / System Flushing
- Chemical Cleaning
- Tank Cleaning
- Waterblasting
- Pipeline Corrosion Repair
- Product Recovery / Waste Minimization
- NORM Removal / Reduction
- Industries Served
- Oil / Gas Production
- Pipeline
- Refining & Petrochemical
- Fabrication
- Power Generation
- Pulp / Paper
- Third Party / Bulk Liquid Storage
Chemical Cleaning
The chemical cleaning process is used to remove various fouling material from tanks, process vessels, pipelines and tubing. This cleaning process, which is generally conducted within a closed loop system, is applicable to new construction (pre-operative cleaning) and routine maintenance. Corrosion coupons are used to verify the effectiveness of the chemical cleaning process.
Examples of chemical cleaning applications are listed below:
- Pre-Operative Cleaning
- New construction / fabrication of piping and or process systems
- Maintenance
- Process Towers
- Process Vessels
- Exchangers
- Pipeline Cleaning
Contamination Removal
Contaminants must be removed from lube and hydraulic oil systems to avoid damage to bearings, seals, valves and pumps.
To avoid commissioning and operational failures the below contamination must be removed:
- Sand
- Rust
- Mill Scale
- Welding Slag
- Corrosion Products
- Construction Debris
- Waterblasting
Gly-Tech provides high-pressure water blasting, including:
- 10,000psi to 40,000psi
- Flex and rigid lancing
- Specialty tips
- Hydromower
- Examples of waterblasting applications are listed below:
- Pipes Drains – clogged
- Exchangers
- Solids tightly adhered to surfaces
- Concrete surfaces
- Product Recovery / Waste Minimization.
Gly-Tech will assist with product recovery and waste minimization through the application of one or more of the following separation technologies, which assist in separating material into oil / water / solid streams.
- Centrifuge
- Shaker
- De-silters / De-sanders
- Oil / Water Separators
- Hydrocyclones
- Pipeline Repair / External Corrosion
Gly-Tech provides the installation of Armor Plate Pipe Wrap, a multidirectional fiberglass matte, embedded in a two- part epoxy, the benefits of which are listed below:
- DOT approved
- Arrests corrosion, and it will not corrode
- Reinstates the original design strength of the pipe
- Easy, in-service application
- NORM Removal / Reduction
Gly-Tech is licensed by the LADEQ to decontaminate equipment and property from regulated levels of NORM (Naturally Occurring Radioactive Material) to non-regulated levels at temporary job-sites.